← Battery Data · Entity: BatteryGroup

H4 Battery

Aliases: L1 · LB1 · DIN 55 · Standard family: EN/DIN

Direct answer: The H4 battery is a EN/DIN-family group — a 12V lead-acid case of 207 × 175 × 190 mm with SAE post terminals, typically 55–60 Ah and 500–600 cold cranking amps (EN 50342 (−18°C)).

Quick facts

Identification

Entity type	BatteryGroup
Entity ID	`WBH-BAT-GROUP-H4`
Group name	H4
Aliases	L1 / LB1 / DIN 55
Standard family	EN/DIN

Specification

Voltage	12V	Standard-defined
Typical capacity	55–60 Ah	World Battery Hub derived — cross-source range
Typical CCA	500–600 A	World Battery Hub derived — cross-source range
Dimensions (L×W×H)	207 × 175 × 190 mm	Standard-defined
Terminal	SAE post	Standard-defined
Typical weight	14–16 kg	World Battery Hub derived — cross-source range

Value types — Standard-defined: fixed by the group standard (voltage, dimensions, terminal); Manufacturer-reported: a representative value from manufacturer datasheets; World Battery Hub derived: a cross-source range aggregated by World Battery Hub from manufacturer datasheets. None is a substitute for a specific battery's datasheet.

Standards & measurement context

Naming standard	EN/DIN
CCA basis	EN 50342 (−18°C)

The CCA figure is defined by its test standard — values from different standards are not directly interchangeable. Capacity values are typical ranges, not a substitute for a specific battery's datasheet.

Applications

Small / compact cars

Technology variants

Flooded / EFB / AGM — see the lead-acid type family for the design trade-offs behind the label.

Equivalent capacity class

~55–65 Ah — other groups in a similar capacity class. This is a capacity comparison, not a physical interchange: dimensions and terminals differ between naming families.

Testing

Relevant methods for this group: CCA testing, capacity testing, load testing — see the testing methods for procedures and standards.

Sources & verification

CCA 500–600 A — EN 50342 (−18°C)

Evidence card — how this entity's data was established

Basis: EN/DIN group reference tables + manufacturer datasheets

EN 50342 reference tables (dimension codes)
Manufacturer datasheets (Varta, Bosch, Banner, Exide)

Confidence: High · Last verified: 2026-09

Typical values; the EN code names the battery's performance class and case size.

Last verified: 2026-09

Values are cross-verified typical ranges, not a substitute for a specific battery's datasheet. Return to World Battery Hub.